Bike tool

Bike gear ratio and speed calculator

Enter your chainrings, cassette and tyre and see the ratio and speed of every gear at your cadence, how easy your lowest gear is on a climb, and how big the jumps are between sprockets.

1. Your drivetrain

Pick a preset or type your own teeth counts. Separate numbers with commas, spaces or dashes.

Your gears

Easiest gear

34×30

Ratio 1.13, 2.39 m per pedal turn

Speed in easiest gear at 70 rpm

10.0 km/h

Your slowest comfortable climbing speed

Hardest gear

50×11

51.8 km/h at 90 rpm

Biggest jump between sprockets

14.3%

24 to 21 teeth

Every gear at 90 rpm

Speed (km/h) and ratio for each chainring and sprocket. Avoid the biggest-ring-to-biggest-sprocket and smallest-to-smallest corners: the chain line is extreme.
Sprocket50-tooth ring34-tooth ring
1151.8 (4.55)35.2 (3.09)
1247.5 (4.17)32.3 (2.83)
1343.8 (3.85)29.8 (2.62)
1440.7 (3.57)27.7 (2.43)
1538.0 (3.33)25.8 (2.27)
1733.5 (2.94)22.8 (2.00)
1930.0 (2.63)20.4 (1.79)
2127.1 (2.38)18.4 (1.62)
2423.7 (2.08)16.1 (1.42)
2721.1 (1.85)14.3 (1.26)
3019.0 (1.67)12.9 (1.13)

Climb check

At 9.0 km/h your easiest gear (34×30) needs 63 rpm. That is below your 70 rpm floor: you would be grinding. An easier gear would need a ratio of about 1.02 or lower, for example a bigger sprocket or a smaller inner ring.

Steps between sprockets

Each shift changes your cadence by roughly this much at the same speed. One-tooth steps (about 6 to 9%) give the finest control; jumps of 12% or more are common in the larger sprockets of wide-range cassettes and are most noticeable on rolling terrain.

30→27: 11.1%27→24: 12.5%24→21: 14.3%21→19: 10.5%19→17: 11.8%17→15: 13.3%15→14: 7.1%14→13: 7.7%13→12: 8.3%12→11: 9.1%

Common setups compared

Easiest and hardest gear for popular combinations, with your tyre rollout and cadence settings. Climbing speed uses 70 rpm.

SetupEasiest gearClimb speed (km/h)Hardest gearTop speed at 90 rpm (km/h)
53/39 with 11-2839×28 (1.39)12.353×1154.9
52/36 with 11-3036×30 (1.20)10.652×1153.9
50/34 with 11-3034×30 (1.13)10.050×1151.8
52/36 with 11-3436×34 (1.06)9.452×1153.9
50/34 with 11-3434×34 (1.00)8.950×1151.8
48/35 with 10-3335×33 (1.06)9.448×1054.7
46/33 with 10-3633×36 (0.92)8.146×1052.4

Where to go next

Choose chainrings and cassettes for your course in triathlon bike gearing explained, find your preferred cadence with the cadence guide, and work out how long each climb will take with the bike speed and climb time calculator.

Frequently Asked Questions

How do I calculate bike speed from gear ratio and cadence?

Speed in km/h equals cadence × gear ratio × rollout in metres × 60 ÷ 1,000. The gear ratio is chainring teeth divided by sprocket teeth, and rollout is about 2.11 m for a 700×25–28 mm tyre. A 34×34 at 70 rpm gives about 8.9 km/h.

What gearing should a beginner triathlete use?

For hilly courses, a compact 50/34 or a 2x setup with a 1:1 or lower easiest gear (such as 34×34) lets you keep turning the pedals on steep climbs. For flat courses, a 52/36 or 53/39 with an 11-28 or 11-30 gives closer steps.

What is gear rollout?

The distance your bike travels for one full turn of the pedals in a gear: gear ratio times the wheel's circumference. Measuring the wheel's circumference with your weight on the bike gives the most accurate number.

What cadence should I climb at?

There is no single right number. Many age groupers are comfortable around 70 rpm or above on climbs; dropping much lower uses more muscle force per stroke and tends to leave the legs more tired for the run.

Is a 1x drivetrain good for triathlon?

It can be on flat or rolling courses and is simpler, but steps between sprockets are larger, so holding a steady cadence on rolling terrain is harder. Check the easiest gear against your steepest climb with the calculator above.

One practical triathlon decision each week

A useful decision, tool, checklist, or evidence-backed update for your next training block or race.

No spam. Unsubscribe anytime.

Updated

What the gear ratio calculator does

Enter your chainrings, cassette and tyre size and the calculator shows:

  • the ratio and speed of every chainring and sprocket combination at your chosen cadence;
  • your easiest and hardest gear, with the distance you travel per pedal turn;
  • a climb check: the cadence your easiest gear needs at the speed you can hold on your steepest climb, and the ratio you would need to stay above your lowest comfortable cadence;
  • the percentage jump between neighbouring sprockets;
  • a comparison of common setups with your tyre and cadence settings.

The formula

Speed (km/h) = cadence (rpm) × gear ratio × rollout (m) × 60 ÷ 1,000

  • Gear ratio is chainring teeth divided by sprocket teeth. A 34-tooth ring with a 34-tooth sprocket is 1.00; a 50 with an 11 is 4.55.
  • Rollout is how far the wheel travels in one full turn: about 2.11 m for a 700×25 or 28 mm tyre. Ratio × rollout is the distance you travel per pedal stroke, sometimes called development.
  • Cadence needed for a speed is the formula turned around: speed × 1,000 ÷ (60 × ratio × rollout).

Worked examples

With a 2.11 m rollout:

Easiest gearRatioSpeed at 70 rpm
39×28 (standard with 11-28)1.39about 12.3 km/h
36×30 (mid-compact with 11-30)1.20about 10.6 km/h
34×30 (compact with 11-30)1.13about 10.0 km/h
34×34 (compact with 11-34)1.00about 8.9 km/h
33×36 (SRAM 46/33 with 10-36)0.92about 8.1 km/h

On a climb where you can only hold 9 km/h, the 34×34 lets you pedal at about 70 rpm, while the 39×28 forces you down to about 51 rpm. At the other end, a 50×11 gives about 52 km/h at 90 rpm, a speed most age groupers only reach downhill, where tucking is often faster than pedalling.

How to use the climb check

  1. Find the steepest climb on your race course and estimate the speed you will hold on it. The bike speed calculator estimates it from your power, weight and the gradient.
  2. Enter the lowest cadence you are comfortable with for a long climb. Many age groupers like to stay around 70 rpm or above; there is no single right number.
  3. If the cadence your easiest gear needs is below your floor, the calculator tells you the ratio you would need, so you can see whether a bigger sprocket or a smaller inner ring closes the gap.

Grinding at a very low cadence uses more muscle force per pedal stroke and tends to leave the legs more tired for the run, which is why easier gearing is a common upgrade for hilly races.

Reading the steps between sprockets

Each shift changes your cadence by roughly the percentage jump at the same speed. One-tooth steps (11 to 12, 12 to 13) are about 6 to 9%; the larger sprockets on wide-range cassettes jump 12% or more. Wide-range cassettes trade close steps for a lower easiest gear: that matters most on rolling courses where you shift often around race power.

Measuring rollout

Tyre labels and wheel-size charts give approximate circumferences. For a precise number, sit on the bike with the tyre at race pressure, mark the tyre and the floor at the contact point, roll forward one full turn and measure between the marks. Enter it as a measured rollout in millimetres.

Before you change parts

Speeds here are what the gear and cadence produce, not what your legs can sustain. A cassette with a bigger largest sprocket may need a longer chain and a derailleur rated for it, and road and mountain-bike parts do not always mix. Check the manufacturer's compatibility chart or ask a bike shop before buying.

Understand the estimate, then act

Review the assumptions behind this planning aid before using the result, then continue to the most relevant practical step.