Swim tool

Swim stroke rate and pace calculator

Enter strokes per length and stroke rate (or your time per length) and get pace per 100, distance per stroke and SWOLF, plus what happens to your pace if you change your stroke rate.

1. Your length

Count every hand entry (left and right), which is how swim watches and Swim Smooth count strokes and stroke rate. Count a length you swim at steady effort, not a sprint or drill.

Your stroke numbers

Pace per 100 m

1:12

Swimming time only; turns and push-offs change it

Time per length

18.0 s

25 m

Distance per stroke

1.39 m

Length ÷ strokes; push-off glide inflates it a little

SWOLF

36

Strokes + seconds per length; lower is more efficient

A stroke rate of 60 SPM is in the typical range for Swim Smooth's Kicktastic and Smooth types. Rate alone does not tell you your type; see the table below and the guide.

What if you change your stroke rate?

Pace per 100 m at different stroke rates. "Same length" keeps your stroke count; "one stroke more or less" shows the usual trade-off when a faster rate shortens the stroke.
Stroke rateSame length (18 strokes)One stroke more (faster rate) or fewer (slower rate)
54 SPM (-6)1:201:16 with 17 strokes
57 SPM (-3)1:161:12 with 17 strokes
60 SPM (now)1:12—
63 SPM (+3)1:091:12 with 19 strokes
66 SPM (+6)1:051:09 with 19 strokes

A faster rate only helps if you keep most of your distance per stroke. If your stroke count rises a little but your time per length still drops, the change is working. Test it with a tempo trainer: swim 4–6 × 100 m at your current rate, then 4–6 × 100 m at +3 SPM, and compare times and stroke counts.

Typical stroke rates by Swim Smooth swim type

Swim Smooth groups swimmers into six types. Ranges count each arm separately and are a starting point for discussion with a coach, not a target for everyone.

TypeWhat it looks likeTypical SPMOften aims for
ArnieStrong, often newer to swimming, fights the water70–8555–65
BambinoNervous or inexperienced, gentle stroke45–5555–65
KicktasticBig kick, often a runner or ex-swimmer53–6565–75
OvergliderLong glide and a pause at the front45–5360–65
SwingerFast, efficient, straight-arm recovery80–100may drop about 5
SmoothEfficient, long stroke, well balanced60–70may lift about 5

Where to go next

Learn how stroke rate and length work together in the stroke rate guide, set your training paces from CSS with the training zone calculator, fix stroke length with swim drills for triathletes, and pick a tempo trainer or paddles in the swim training tools guide.

Frequently Asked Questions

How do I calculate my swim pace from stroke rate?

Time per length in seconds equals strokes per length divided by stroke rate, times 60. Pace per 100 m is that time multiplied by 100 divided by the pool length. For example, 18 strokes at 60 strokes per minute takes 18 seconds per 25 m, which is 1:12 per 100 m, excluding turns.

What is a good stroke rate for triathlon?

There is no single number. Swim Smooth reports elite rates of about 65 to 110 strokes per minute, counting both arms. Many triathletes overglide below about 50 to 55 and swim faster after raising their rate in small steps of 2 to 5 strokes per minute. What matters is the rate at which you keep most of your distance per stroke.

What is distance per stroke?

How far you travel with each arm stroke: the pool length divided by your strokes per length. With 18 strokes per 25 m it is about 1.39 m. Push-off glide makes it look a little longer than it is mid-pool.

What is a good SWOLF score?

SWOLF is your stroke count plus your time for one length. It only means something compared with your own earlier scores in the same pool at a similar effort, because height and pool length change it.

Do I count one arm or both?

This calculator, swim watches and Swim Smooth count both arms: every hand entry is one stroke. Some coaches count one arm (cycles); double those numbers to compare.

One practical triathlon decision each week

A useful decision, tool, checklist, or evidence-backed update for your next training block or race.

No spam. Unsubscribe anytime.

Updated

What the stroke rate calculator does

Swimming speed is the product of two numbers: how often your arms turn over (stroke rate, in strokes per minute or SPM) and how far each stroke carries you (distance per stroke, DPS). The calculator links them to the numbers you see on a pace clock or watch:

  • From stroke count and stroke rate: time per length, pace per 100, distance per stroke and SWOLF.
  • From stroke count and time per length: your stroke rate, distance per stroke and SWOLF.
  • A what-if table showing your pace at 3 and 6 SPM slower or faster, both if you keep the same stroke count and if the change costs (or gains) one stroke per length.

It works for 25 m, 50 m and 25-yard pools. Strokes are counted per arm (every hand entry), as Swim Smooth and swim watches do.

The formulas

  • Time per length (s) = strokes per length ÷ stroke rate × 60
  • Pace per 100 = time per length × 100 ÷ pool length
  • Distance per stroke = pool length ÷ strokes per length
  • SWOLF = strokes per length + seconds per length
  • Stroke rate from a timed length = strokes ÷ seconds × 60

Worked example

Eighteen strokes per 25 m length at 60 SPM:

  • 18 ÷ 60 = 0.3 minutes, or 18 seconds per length.
  • 18 × 4 = 1:12 per 100 m, excluding turns.
  • 25 ÷ 18 = about 1.39 m per stroke.

Raise the rate to 66 SPM while keeping 18 strokes, and each length takes about 16.4 seconds, or roughly 1:05 per 100 m. But if the faster rate shortens your stroke to 21 strokes per length, each length takes about 19.1 seconds and you are slower than before. That is the central lesson: a faster rate only helps if you keep most of your distance per stroke.

Why calculated pace is faster than your real pace

When you start from stroke rate, the calculator gives swimming time only. Real lengths also include the push-off and glide (which covers several metres with no strokes) and the turn. That is why:

  • the calculated pace is usually a little faster than your pace-clock time;
  • distance per stroke looks slightly longer than it really is mid-pool, because the glide is shared across your strokes.

For the most realistic numbers, use the "time per length" option with a wall-to-wall time from a steady swim.

How to measure your numbers

  • Stroke count: count every hand entry on a length at steady effort, in the middle of a set, not after a big push-off or on a sprint.
  • Stroke rate: read it from a swim watch, ask a friend to time 20 strokes (SPM = 20 ÷ seconds × 60), or swim to a tempo trainer set at a known rate.
  • Time per length: use the pace clock and average several lengths.

Using the what-if table

Use the table to plan a tempo trainer test. Swim 4 to 6 × 100 at your current rate, then repeat at 3 SPM faster, keeping the effort steady. Compare your times and stroke counts with the table:

  • If your time drops and your count rises by no more than about one stroke, the faster rate is working for you.
  • If your count jumps by two or more and your time does not improve, you are shortening the stroke; go back to the previous rate or work on the catch with drills.

Raise the rate in small steps of 2 to 5 SPM over a few weeks rather than in one jump.

Swim types

Swim Smooth's six Swim Types each have a typical stroke-rate range, shown in the table on the page. Swimmers who glide or pause at the front of the stroke (Overgliders and some Bambinos) usually benefit from a higher rate; swimmers who fight the water with short, rushed strokes (Arnies) often need a lower one. Rate alone does not tell you your type, so use it alongside video or a coach's eye.

Limits

Stroke count depends on height, arm length, pool and push-off, so compare only with yourself. SWOLF can be lowered by gliding or kicking harder without swimming faster. Open water usually favours a slightly higher, more continuous rhythm than the pool, so rehearse your open-water rate before race day.

Understand the estimate, then act

Review the assumptions behind this planning aid before using the result, then continue to the most relevant practical step.